Importante - John Bean CENTAUR Manual Del Operador

IMPORTANT!!
SAVE THESE INSTRUCTIONS
IMPORTANT!!
CONSERVER LES PRÉSENTES INSTRUCTIONS

IMPORTANTE !

¡
CONSERVE ESTAS INSTRUCCIONES
24
Specifi cations
3.0 Introduction
Congratulations on purchasing the pneumatic-electric
tire changer:
This tire changer is designed for ease of operation, safe
handling of rims, reliability and speed.With a minimum
of maintenance and care your tire changer will provide
many years of trouble-free operation.Instructions on
use, maintenance and operational requirements of the
machine are covered in this manual.
STORE THIS MANUAL IN A SAFE PLACE FOR ANY
FURTHER REFERENCE. READ THIS MANUAL
THOROUGHLY BEFORE USING THE MACHINE.
Application
The tire changer is intended to be used as a device
for automatically demounting, mounting and beading
motor vehicle and SUV tires mounted on one-piece
rims with the following specifi cations:
Maximum wheel diam.:
Maximum wheel width:
This device must be used in the application for which
it is specifically designed.Any other use shall be
considered as improper and thus not unreasonable.
The manufacturer shall not be considered liable
for possible damage caused by improper, wrong or
unreasonable use.
Manuals supplied with the unit
The unit includes the following documentation:
- Guida all'Installazione e alla Sicurezza
(standard supplement Fig. 1-1).
Installation instructions
Further installation instructions are in the Appendix
of the Operator Manual.
- Operator's Manual (available on web).
The operator must learn in detail the instructions
contained in them and meticulously observe the
notes HAZARD and CAUTION WARNINGs.
- Spare Parts Booklet
Document used only by the Technical Support staff.
EC Declaration of Conformity
The EC Declaration is included in the Spare Parts
Booklet.
....... .......
-
John Bean CENTAUR
1200 mm (47")
381 mm (15")