John Bean CENTAUR Manual Del Operador página 30

3
A
1
30
4.0-1
C
B
4.1-1
4.1-2
4.1-2a
2
4.1-3
Specifi cations
4.1 Controls
Before operating the machine ensure that you have
properly understood the operation and function of all
the controls, as set out in this chapter.
Mount/demount tool position
The push button on the handle (3, Fig.4.0-1) allows the
user to position the tool correctly.
1.
To unlock and let the slide with the tool go up: push the
button all the way in with the forefi nger in the direction
of the arrow (A, Fig. 4.1-1).
2.
To unlock and let the slide with the tool go down: push
the button with the thumb in the direction of the arrow,
until resistance increases (B, Fig. 4.1-1).
3.
To lock: push the button fi rmly with the thumb (C, Fig.
4.1-1).
W A R N I N G : T H E O P E R AT I O N S C O U L D
BE DANGEROUS. FOLLOW THE SAFETY
INDICATIONS SET OUT IN THE PLATES.
Figura 4.1-2
DANGER OF HAND CRUSHING
Figura 4.1-2a
DANGER, MOVING PARTS
Automatic Head
The automatic head consists of a tire demounting
section (1, Fig.4.1-3) and a mounting section (2,
3
Fig.4.1-3), controlled by the pneumatic control.
The control (3, Fig.4.1-3), moves the claw (2, Fig.4.1-3)
to extract and remove the tyre from the rim, with the
following movements:
- Lever down; the head lever moves up
- Lever up; the head lever moves down.
....... .......
-