SATA clean RCS Serie Instrucciones De Servicio página 105

[2-10] Collecting tank
[2-11] Cover
[2-12] Cleaning brush
[2-13] Cleaning nozzle
SATA clean RCS the turbo cleaner
[3-1] Air intake G 1/4 (concealed)
[3-2] Push-button "Drying"
[3-3] Cover / storage surface
Rinsing connection
[3-4]
Dry-blowing nozzle
[3-5]
Housing
[3-6]
[3-7] Suction hose
[3-8] Seal coupling
[3-9] SATA RPS intake cup
Hole pattern SATA clean RCS micro
Fastening holes
[4-1]
Hole pattern SATA clean RCS compact
[5-1] Fastening holes
Hole pattern SATA clean RCS the turbo cleaner
[6-1] Fastening holes
Control module (only for SATA clean RCS the turbo cleaner)
Cover / storage surface
[7-1]
Air flow adjusting nut
[7-2]
Remove control module (all variants)
Control module
[8-1]
[8-2] Stud (4 x)
[8-3] Suction hose
Splash guard and cleaning brush
Threaded pin
[9-1]
Cleaning brush
[9-2]
Fastening rivet
[9-3]
Splash guard
[9-4]
[9-5] Holder
Operating Instructions SATA RCS
[2-14] Exhaust connection
[2-15] Splash guard
[2-16] Push button "Clean"
[2-17] Control module
[3-10] Hole for earthing
connection
[3-11] SATA RPS discharge cup
[3-12] Cover
[3-13] Cleaning brush
[3-14] Cleaning nozzle
[3-15] Exhaust connection
[3-16] Splash guard
[3-17] Rotary switch
[3-18] Control module
Cleaning agent flow
[7-3]
adjusting nut
Housing
[8-4]
[8-5] Fastening nut (4 x)
EN
105