Assembly - SATA clean RCS Serie Instrucciones De Servicio

Operating Instructions for SATA RCS
US
Description
Air consumption drying
process
Cleaning solution con-
sumption per cleaning
process:
Cleaning time per co-
lour change
Drying time per colour
change
Operating pressure
Dimensions (WxHxD)
Weight

8. Assembly

The SATA clean RCS units are intended for connecting to the stationary
compressed air supply.
Information!
Depending on the quality of the compressed air, we recommend install-
ing a cyclone separator with sintered filter before the SATA clean RCS
units (SATA filter 424 inside the spray booth and SATA filter 100 outside
the spray booth). This separates oil and condensation as well as par-
ticles down to a size of 5 µm from the compressed air.
Installation site requirements
■ Compressed air connection 1/2" (male thread), 1/4" (male thread) or
suitable SATA quick connect nipple.
■ Compressed air line must provide at least 58 psi for the SATA clean
RCS the turbo cleaner, or at least 87 psi for the SATA clean RCS com-
pact and SATA clean RCS micro.
■ Compressed air line with an inner diameter of at least 0.4".
■ Installation site must be protected against mechanical forces.
424
SATA clean SATA clean
RCS micro
6.9" x 12.2" x 18.9"
180 mm x
16.5"
141.1 oz.
SATA clean
RCS com- RCS the tur-
pact
approx.4.6 cfm
approx. 21 sec.
approx. 4 sec.
58 psi 87 psi – 116
12.2" x 28.0"
x 8.9"
246.9 oz.
bo cleaner
ca. 140 ml
psi
x 8.9"
352.7 oz.