Technical Data; Assembly - SATA clean RCS Serie Instrucciones De Servicio

Operating Instructions SATA RCS
EN

7. Technical Data

Description
Air consumption clean-
ing process
Air consumption drying
process
Cleaning agent con-
sumption per cleaning
process:
Cleaning time per col-
our change
Drying time per colour
change
Operating pressure
Dimensions (w x h x d)
Weight

8. Assembly

SATA clean RCS are to be connected to a stationary compressed air sup-
ply system.
Notice!
Depending on the quality of the compressed air, it is advisable to install
a cyclone separator with sinter filter upstream of the SATA clean RCS
(SATA filter 424 in the spray booth and SATA filter 100 outside the spray
booth). This cleans the compressed air of any oil, condensate and parti-
cles up to a size of 5 µm.
Requirements for the installation site
■ Compressed air connection 1/2" (outer thread), 1/4" (outer thread) or
matching SATA connection nipple.
■ Compressed air pipe must supply min. 4.0 bar for SATA clean RCS the
turbo cleaner, or min. 6.0 bar for SATA clean RCS compact and SATA
106
SATA clean SATA clean
RCS micro
175 mm x
180 mm x
420 mm
4000 g
SATA clean
RCS com- RCS the tur-
pact
approx.140 Nl/min
approx.130 Nl/min
approx. 21 sec.
approx. 4 sec.
4.0 bar 6.0 bar – 8.0
310 mm x 310 mm x 710
480 mm x mm x 225 mm
225 mm
7000 g
bo cleaner
ca. 140 ml
bar
10000 g