Stopping The Wash Cycle And End Of Wash Cycle; Drainage Of The Machine - ASBER TECH-H500 Manual De Instrucciones

asberprofessional.com
6.1.5

Stopping the wash cycle and end of wash cycle.

The wash cycle can be stopped in the following ways:


At the end of the wash cycle, remove the basket and leave the dishes to dry naturally. Remove the dishes
from the basket with clean hands, taking care not to burn yourself as the dishes are extremely hot.
6.1.6

Drainage of the machine

ASBER dishwashers have two types of drainage; gravity drainage or using a drainage pump, which is op-
tional. The drainage pipe must always be fitted on a siphon to prevent the return of odours.
6.1.6.1 Drainage by gravity.
To drain the machine in this way, just remove the overflow from the machine and it will drain naturally. For
reasons of safety, this method of drainage should only be used with the machine switched off.
6.1.6.2 Drainage using the drainage pump (optional).
The drainage using the drainage pump option is only available on request. To drain the machine using this
method, proceed as follows:





51
asberprofessional.com
By switching off the machine (pressing ON-OFF for 1.5 s)→the cycle stops completely.
By opening the hood → when the hood is closed the cycle is resumed.
Remove the overflow valve.
Leave the hood up.
Press the drain button for 3 seconds.
Select drainage (short cycle button) → press 3 seconds
The drainage cycle will start automatically.
At the end of the cycle (approx. 160 s), the machine can be switched off.
To drain the machine with the drainage pump, the hose must be at a
height (max. 800 mm).
ENGLISH