Temperature Compensation - Mettler Toledo SevenGo Duo Pro Instrucciones De Manejo

●
If the "automatic endpoint" format is selected, the measurement stops automatically as soon
as the Stability icon appears.
●
If the "manual endpoint" format is selected, press READ to manually stop the measurement.
●
If the "timed endpoint" format is selected, the measurement stops after the preset time.
4.11 T emperature compensation
We recommend the use of either a built-in or a separate temperature probe. If a temperature probe
is used, ATC and the sample temperature are displayed. If no temperature sensor is used, MTC
is dis p layed and the sample temperature should be entered manually. The meter accepts only an
NTC 30 kΩ temperature sensor.
The meter calculates the temperature-adjusted electrode slope using this temperature and shows
the temperature-compensated pH/ion value in the measurement display (only SG98).
51710917_V02.2011_BA_SG9_98_EnFrEs.indb 21
As soon as the measurement is stable according to the selected stability criterion, the Sta-
bil i t y icon appears.
Operating the pH/ORP/Ion/DO meter SG98 and DO meter SG9 23
21.04.2011 11:46:01