Refrigeration Specifications; Single Circuit; Dual Circuits - Airwell DK 125 Manual De Instalación Y De Mantenimiento

REFRIGERATION SPECIFICATIONS

SINGLE CIRCUIT

models
REFRIGERANT CHARGE
COOLING ONLY
HEAT pUmp
ADDITIONAL CHARGE
Connecting pipes 1/2" liquid pipe
Connecting pipes 5/8" liquid pipe

DUAL CIRCUITS

models
REFRIGERANT CHARGE
COOLING ONLY
HEAT pUmp
ADDITIONAL CHARGE
Connecting pipes 1/2" liquid pipe
Connecting pipes 5/8" liquid pipe
NOTE:
The 125, 155 and 185 units are supplied pre-filled with their refrigerant charge.
The 205, 255, 305, 405m, 405, 505, 605, 755 and 905 units are supplied filled with a nitrogen charge. The
installer must fill the system with the stated volume of refrigerant at the time of installation.
The charges are stated for 4m pipe lengths. For longer pipe lengths, the refrigerant charge must be adjusted in
accordance with the details provided.
Refrigerant fluid charge values are given for information purposes only. The actual charge required must be
adjusted during installation in order to optimise performance.
The products' installation and environment represent vital parameters for their proper operation.
125 - 125V 155 - 155V
g 3030 4730 5530
g 3200 4830 5950
g/m 48 50
g/m / /
405 505
g 2 x 5410 2 x 7060 2 x 9930
g 2 x 5160 2 x 7110 2 x 9430
g/m 125 125
g/m 210 210
7
185 205 255
5910 6060
5910 6010
/ 125 125
55 / 210
605 755 905
2 x 10160 2 x 12300
2 x 10160 2 x 12300
125 125 125
210 210 210
305 405m
8760 11550
8700 11550
125 125
210 210