Steris 00711005 Instrucciones De Uso página 4

DANGER: Fire/Burn Hazard. DO NOT place active accessories near or
in contact with flammable materials or the patient when not in use, as it
may cause fires resulting in serious injury to the patient, user and damage
to equipment and property.
→ Put electrosurgical devices down in a safe place that is dry,
→ Accessory devices should NEVER be in contact with the
→ Disconnect active cords from accessories when not in use,
CAUTION: Tripping Hazard. Care should be taken when placing and
walking around cords and accessory items connected to the ESU to
prevent possible tripping hazards.
CAUTION: Confirm power setting selected before delivering energy in all
methods and modes.
→ Verify the desired Method/Mode with the physician and repeat
→ Verbally confirm each setting change.
CAUTION: For surgical procedures where the current could flow through
delicate parts of the body, the use of bipolar techniques may be desirable
in order to avoid unwanted
tissue damage.
WARNING: Check the equipment and accessories each time before
using them. Use of damaged equipment and accessories or use of
modified equipment or accessories may result in serious burns or injury to
the patient and user or equipment damage or malfunction.
→ Replace damaged or defective accessories.
→ If the active cord or any US Endoscopy accessories are
WARNING: Burn Hazard. Position the patient monitoring leads in such a
way that contact with the patient or other leads is avoided because the
capacitance between the active cord and the patient may result in some
local high current densities causing thermal burns to the patient.
→ Keep the active electrode at least 15 cm (6 inches) away
→ DO NOT place the active cord or other equipment cables on
→ DO NOT allow the monopolar active cord or the cord to the
00732676B
non-conductive and visible by the user and medical
personnel.
patient, medical personnel or flammable materials when not
in use.
when passing off or accepting accessories.
settings.
damaged, please contact STERIS Customer Service at
1-800-548-4873 or your local STERIS Endoscopy
Product Specialist for a replacement.
from any monitoring electrode.
the patient.
patient return electrode to lie alongside, or be entwined with,
the cables to the monitoring electrodes.
Page 4 of 89