Fujitsu Control 4 Serie Guia Del Usuario página 33

3. Local and Remote Configuration
4. If you selected File System, select Browse to specify the location of the
firmware upgrade file.
-or-
If you selected TFTP, enter the Server IP Address and Firmware File you
wish to load.
-or-
If you selected FTP or HTTP, enter the Server IP Address and Firmware
File you wish to load, as well as the User Name and User Password.
5. Click Upgrade.
Saving and restoring switch configurations and user databases
You may save the switch configuration to a file. The configuration file will contain
information about the managed appliance. You may also save the local user
database on the switch. After saving either file, you may also restore a previously
saved configuration file or local user database file to the switch.
To save a managed appliance configuration or user database of a managed
appliance:
1. From the side navigation bar, select Unit View > Appliance > Overview to
open the Unit Overview window.
2. Click Save Appliance Configuration or Save Appliance User Database. The
File Download dialog box will open.
3. Click Save. The Save As dialog box will open.
4. Navigate to the desired location and enter a name for the file. Click Save.
5. Click Close.
To restore a managed appliance configuration or user database of a
managed appliance:
1. From the side navigation bar, select Unit View > Appliance > Overview to
open the Unit Overview window.
2. Click Restore Appliance Configuration or Restore Appliance User Database.
The Restore Appliance Configuration Window or Restore Appliance User
Database Window will appear.
3. Click Browse. Navigate to the desired location and select the file name. Click
Upload.
28
590-1058-640A