Final Decommissioning - Iso KEMPER MaxiFil Manual De Instrucciones

KEMPER MaxiFil stationary - operating instructions- EN

8.3 Final decommissioning

Dismantling work has to be carried out with greatest care, so that no dusts adhering
to the MaxiFil is stirred up which may cause harm to persons performing tasks on the
device.
In the run-up to disassembly with subsequent disposal the proper disposal of welding
smoke contaminated housing parts etc. should be coordinated and clarified with
regional waste management provider.
The work area for dismantling should be in a well-ventilated room with filter exhaust
air; the area should be separated/marked.
The MaxiFil has to be cleaned and the filter element has to be removed prior to
dismantling. Any dust remaining on the MaxiFil should be vacuumed off. Please use
an industrial vacuum cleaner of dust class "H" for this purpose.
Please wear personal protective equipment such as protective clothing, gloves, filter
respirator mask etc. in order to avoid contact with harmful dusts.
Stirred up dust have to be vacuumed immediately with a vacuum cleaner of dust
class "H"!
The work area has to be cleaned after completed dismantling of the MaxiFil.
- 87 –
Technical modifications and errors expected.