Timex Cycle Trainer 2.0 Manual De Usuario página 21

Ocultar thumbs Ver también para Cycle Trainer 2.0:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 179
To set up the custom pages:
1. From the main menu, highlight CONFIGURATION, then press ENTER.
2. Highlight PAGE SETTING, then press ENTER.
3. Highlight the custom page you want to configure, then press ENTER.
4. Press  or  to select the number of fields to display on the custom page, then press ENTER.
5. Press  or  to highlight a field, then press ENTER.
6. Press  or  to highlight the data to display in that field, then press ENTER.
7. Repeat steps 5 and 6 for each field.
This table describes the data that can display on custom screens.
data
description
ALTI MAX
highest altitude reached during this ride
ALTI MIN
lowest altitude reached during this ride
ALTITUDE
your current altitude above sea level
Asc SPEED
rate at which you are gaining altitude
CAD AVG
average RPM of bike crank
CAD INZN
amount of time spent in your cadence zone
CADENCE
current RPM of the bike crank
CAL RATE
number of calories burned per hour
CALORIES
calories burned
CUMULATE+
total gain in altitude
CUMULATE-
total loss in altitude
DISTANCE
total distance traveled
HR
current heart rate
HR%
current heart rate as a percentage of maximum
HR AVG
average heart rate over the entire ride
HR INZN
amount of time spent in your heart rate zone
HR MAX
highest heart rate achieved during this ride
LAP DIST
distance you have traveled during this lap
LAP PACE
average pace for this lap
LAP SPEED
average speed for this lap
LAP TIME
time of this lap
ConFigUring the lap SCreen
You can also configure the data that displays in the message screen that displays when you take a split. There
are always two data fields in the lap screen, but you set the data that displays in these fields.
1. From the main menu, highlight CONFIGURATION, then press ENTER.
2. Highlight PAGE SETTING, then press ENTER.
3. Highlight SET LAP PAGE, then press ENTER.
4. Highlight one of the fields, then press ENTER.
5. Press  or  to highlight the data to display in that field, then press ENTER.
6. Repeat steps 4 and 5 for the second field.
This table describes the data that can display in the lap screen.
data
description
LAP TIME
time of this lap
LAP SPLIT
total time of all laps in this ride
LAP DIST
distance you have traveled during this lap
LAP SPEED
average speed for this lap
data
description
LAPS
number of laps in this ride
PACE
current time per mile
PACE AVG
average time per mile averaged over the entire ride
PACE BEST
fastest pace achieved during this ride
PACE INZN
amount of time spent in your pace zone
PACER
amount of time ahead or behind your target
PACER E
time ahead or behind the trainer Trainer distance
PACER T
time ahead or behind the trainer time
POWER
current power output
POWER AVG
average power in watts averaged over the entire
ride
POWER MAX
highest power in watts reached during this ride
PWR ZONE
amount of time spent in your power zone
PRESSURE
barometric pressure at your current location
REST DIST
distance to travel to achieve your goal
SLOPE
steepness of current path (positive indicates uphill,
negative indicates downhill)
SPD INZN
amount of time spent in your defined speed zone
SPEED
current speed
SPEED AVG
average speed averaged over the entire ride
SPEED MAX
fastest speed achieved during this ride
TEMP
current temperature
TIME
time of day
data
description
LAP PACE
average time per mile for this lap
LP AVG HR
average heart rate for this lap
POWER AVG
average power in watts for the lap
21

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para Timex Cycle Trainer 2.0

Tabla de contenido