4.2 Structure of the safety instructions
CAUTION
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe
the safety instructions. Consequences are presented as follows if more
than one consequence is possible:
>
E.g.: Consequence 1 in case of failure to observe the hazard
>
E.g.: Consequence 2 in case of failure to observe the hazard
► This symbol identifies activities/actions that must be observed/carried
out in order to avert the hazard.
4.3 General Safety Instructions
NOTICE
Use of the product with damaged charger extension cable
Lack of proper charging functionality due to damaged charger extension
cable (cable break) on the prosthesis socket as a result of constant motion
while walking.
► Do not relocate the charger extension cable to the prosthesis socket
but rather over the tube adapter.
4.4 Patient information
NOTICE
Penetration of dirt and humidity into the product
Lack of proper charging functionality due to malfunction.
► Ensure that neither solid particles nor liquids can penetrate into the
product.
NOTICE
Mechanical stress on the product
Lack of proper charging functionality due to malfunction.
► Do not subject the product to mechanical vibrations or impacts.
► Check the product for visible damage before each use.
► Take any necessary measures (e.g. repair, replacement, inspection by
the manufacturer's customer service, etc.).
10 | Ottobock