Cleaning; Storage - Silvercrest SKM 350 A1 Instrucciones De Servicio

__CPE273409_Kuechenmaschine_B5.book Seite 52 Dienstag, 17. November 2015 12:25 12

8. Cleaning

Clean the device prior to its first use!
DANGER! Risk of electric
shock!
~ Pull the mains plug|14 out the wall
socket before cleaning the food proces-
sor.
~ The motor block|15, the power cable
and the mains plug|14 must not be im-
mersed in water or any other liquids.
DANGER! Risk of injury from
cutting!
~ When washing manually, the water
should be sufficiently clear that you can
see the blades|4,|5 and|8 easily.
WARNING! Risk of material dam-
age!
~ Do not use any astringent or abrasive
cleaning agents.
Dismantling the device
1. Pull out the mains plug|14.
2. Turn the bowl|11 anti-clockwise, until
the symbol |16 points to the bottom
marking on the bowl|12.
3. Hold the bowl|11 tightly. Turn the lid|3
anti-clockwise, until the symbol
points to the top marking on the
bowl|10. Remove the lid.
4. Carefully remove the dough blade|7,
the blade insert|8 or the insert holder|6
with attached slicing insert|4 / grating
disk|5. Remove the drive axle|9.
5. Figure F: turn the insert holder|6
around and hold it over a washable,
scratch-proof surface. Press the extending
edges of the slicing insert|4 / grating
disk|5 inwards and press it out.
52 GB
How to clean properly
1. If necessary, wipe down the motor
block|15 and the power cable|14 with
a damp cloth. Ensure that the motor
block|15 is completely dry before the
next time it is used.
2. Wash all other parts by hand in warm
water and a little detergent.
3. Allow all parts to dry completely before
you put them away or use the device
again.
Some cleaning tips
• Clean the device as soon as possible af-
ter use in order to prevent food rem-
nants from drying on.
• After processing very salty or acidic
foodstuffs, the dough blade|7 / blade
insert|8, the insert holder|6 and the slic-
ing insert|4 / grating disk|5 should be
washed thoroughly and right away.

9. Storage

DANGER for children!
~ Keep the device out of the reach of chil-
|2
dren.
DANGER!
~ In order to avoid accidents, the mains
plug|14 must never be connected to a
wall socket while in storage.
• Assemble the food processor for stor-
age. This allows the blade insert|8 to be
stored safely.
• Select a location where neither high
temperatures nor moisture can affect the
device.
• Figure G: the power cable|14 can be
wound up on the cable spool in the
housing cover of the motor block|15.