Care And Cleaning - VQ OrthoCare BioniCare Hand System Manual De Instrucciones

Care and Cleaning

Signal Generator
The case of the Signal Generator may be cleaned with a cloth and cotton
swab. The Signal Generator should be turned "OFF" and not connected
to the generator dock when cleaning. Do not use liquids for cleaning; the
Signal Generator is not waterproof. The Signal Generator case must not be
opened by removing the screws, because there are no operator serviceable
components inside. Always store the Signal Generator in a clean, dry area
between 0° and 140°F.
!
SIGNAL GENERATOR CAUTIONS
• Do not connect the Signal Generator to any electrical outlet.
• Remove the battery from the Signal Generator during long-term
storage to prevent battery leakage. Failure to do so may damage
the Signal Generator.
• Replace batteries immersed in water or liquid. Failure to do so
may damage the Signal Generator.
• Do not store batteries with their terminals touching. Batteries
may be damaged or their charge drained.
• When using rechargeable batteries, carefully read and follow all
instructions provided with the batteries and the battery charger.
• Dispose of batteries according to current federal, state and local
regulations.
• Factory manufactured conductive garments have been designed
and authorized specifically for use with this product and must not be
manipulated or altered in any way.
BioniCare Hand System
®
ENGLISH | 17