Wiring - Astralpool Corail protect Manual De Uso

4.5 WIRING

For all the wiring, use shielded cable type SYT1
The beacons are made up of 2 transmitter cells, 2 receiver cells and an electronic beam control board. The
master beacon also has an alarm control board, which receives all the information concerning intrusion
alarms for the various beacons, signalling for exterior alarms and the power supply systems.
4.5.1. Alarm control board (wiring for the master beacon)
Lower terminal strip
Upper terminal strip
Caja de mandos
Remember to connect the shielding on the cables to
the earthing screw on each beacon
versión 1-2008
16