Scope Of Delivery; General Information; Reading And Keeping The Instructions For Use; Explanation Of Symbols - Louis 10035536 Instrucciones De Uso

UNIVERSAL MOTORCYCLE TURN SIGNAL
WITH INTEGRATED BRAKE AND TAIL LIGHT

1 | Scope of delivery

Example
1
Turn signal, incl. power cable
1
Hexagon nut
2

2 | General information

2.1 | Reading and keeping the Instructions for Use

These instructions for use refer exclusively to the Louis Turn
Signals with integrated brake and tail light. They contain important
information on installation, safety and the warranty. Read the
instructions carefully, in particular the safety instructions, before
using the turn signal. Failure to adhere to instructions can cause
damage to the turn signal or to the vehicle. Keep these instructions
for future reference. If you pass the turn signal on to third parties,
you must also hand over these instructions.
The instructions for use are based on the standards and
regulations applicable in the European Union and reflect the
current state of technology. If abroad, also observe country-specific
guidelines and laws.
16
2
Instructions (not shown)
3
2.2 | Explanations of symbols
The following symbols and signal words are used in these instruc-
tions for use.
This signal symbol/word indicates a
hazard with a medium risk level which,
WARNING!
if not avoided, may result in death or
serious injury.
This signal symbol/word indicates a
hazard with a low risk level which, if not
CAUTION!
avoided, may result in minor or moderate
injury.
This signal word warns of possible
NOTE!
material damage.
This symbol gives you useful additional
information about assembly or usage.
This signal word warns of possible
material damage.

3 | Safety

3.1 | Intended use

This Louis Turn Signal with integrated brake and tail light is a
universal motorcycle turn signal for replacing a defective OEM rear
turn signal or for customising your motorbike.
This turn signal is not designed for a specific type of vehicle.
The fastening has been selected so that the turn signal can be
successfully used on a wide range of motorcycle models.
The turn signal has a valid "E" mark for rear mounting, and is
therefore street-legal without any additional individual component
approval.
Only use the turn signal as described in these instructions. Any
17