Armrest; Adjusting The Height; Safety And Operation - MINOS PLENA Manual De Usuario

ARMREST

Folding or removing the armrest
To remove the armrest, press the locking mechanism and pull the
armrest backwards. To get in or out of the chair, leave the armrest
in this position or remove it completely by simply turning it to release
the pin and then pulling it out.
To release the pin, the tab on the shaft must coincide with the groove
in the hole.

Adjusting the height

To adjust the height, you need an Allen key and a
spanner. Use the tools to unscrew the locking bolt
and pull on the armrest until it is at the desired
height. Fasten the bolt using the Allen key.

SAFETY AND OPERATION

Parts
All the wheelchair parts and elements are originals and must not be
replaced by other standard parts available on the market. The use of
any part that is not an original Minos part renders the chair guarantee
null and void. Please consult your distributor before changing a part.
Armrest and footrest
Make sure that the armrest and footrest are securely fastened in
position. Do not lift the chair by the armrest or footrest under
any circumstances, since this could injure the user or damage
the structure of the chair. Never stand up on the footrest.
Make sure that the footrest is at the correct height from
the floor so that it does not come into contact with it.
Pushing the chair yourself
For models with the 600 mm rear wheel.
Use the handrim fitted to the rear wheels.
Slight gradient
Keep your back straight and use the handrim to move
forward.
Gentle hill
Bend your back forwards slightly and use the handrim
to move forward.
19
!