wheels is recommended.
Long armrest
Remove the side dust guard by unscrewing the
bolt and fit the new model (long). Fit at the desired
height.
IMPORTANT: Do not loosen the handles more than two turns, since
the interior nut will come off and unadjust the system.
Safety belt
The safety belt is adjusted using a
hook and loop fastener and a clip
with flanges at the rear of the
backrest handle.
Manual reclining backrest
To recline the backrest, pull the release mechanisms
until it comes out of position and move it to the
desired angle.
Maximum inclination: 60°. The use of anti-tip
Height-adjustable handles
Unscrew the handles on the top of the backrest,
adjust to the desired height and fasten the handles
back in position.
Headrest extension
Insert the extension between the backrest
upholstery and the backrest handles until it comes
into contact with the backrest upholstery.
Reconditioning kit. This contains the backrest
and seat, 2 front wheels and 2 height-adjustable
armrests.
27