Twin Needle Sewing - Janome MC 5200 Manual De Instrucciones

q
z
c
b
n
Mode 2
Mode 3
e
w
x
v

Twin Needle Sewing

Machine settings
q Pattern:
See the list below.
w Presser foot: Satin stitch foot F
e Thread tension: AUTO
NOTES:
* When you sew patterns with the twin needle, press the
twin needle button and test the stitches first before you
begin to sew.
* Use the zigzag foot A or satin stitch foot F for twin needle
sewing.
* Turn off the machine before changing the needle.
Use the extra spool pin and spool stand.
Threading the machine for twin needle sewing
Place two spools of thread, one on the horizontal spool pin
and the other on the extra spool pin as shown.
Draw both threads from the spools and thread them
through the points from z to n.
Make sure that the two strands of thread do not get
tangled.
Turn the power switch on and press the twin needle button
.
Select a pattern and sew.
NOTES:
* The stitch width is limited to 3 mm or less.
* The stitch patterns shown to the left can be sewn with the
twin needle.
* If a selected pattern is not for twin needle, a buzzer
will sound and a message will appear on the LCD screen.
114