Janome MC 5200 Manual De Instrucciones página 90

b
Step 1
Step 2
Step 3
n
m
b Start the machine to sew the buttonhole.
Step 1: The machine will sew the front bartack and the left
Step 2: The machine will sew the right row.
Step 3: The machine will sew the back bartack, and the
n When buttonhole sewing is finished, push the buttonhole
NOTE:
To make a solid and sturdy buttonhole, sew another layer of
buttonhole over the previous stitches.
After the buttonhole is finished, simply start the machine
again.
Do not raise the foot or buttonhole lever.
The machine will sew another layer of buttonhole and stop
automatically when it is completed.
m Remove the fabric and place a pin just below the bartack
q
w
86
The buttonhole will be automatically sewn.
row first.
Then it goes back o the starting point with straight
stitch.
machine will stop automatically.
lever upward as far as it will go.
at each end to prevent accidentally cutting stitches.
Cut the opening with the seam ripper.
Use an Eyelet puncher to open a keyhole buttonhole
q Seam ripper
w Eyelet puncher