Extender Stitches - Janome MC 5200 Manual De Instrucciones

q
w
q
w

Extender Stitches

Patterns #44, #45 and #46 (mode 2) are extender stitches
which are used to insert straight stitches between stitch
patterns.
The extender stitches inherit the stitch length and needle
drop position of a previous pattern in the programmed
pattern combination.
Example: Inserting 2 counts of the straight stitch between
the blind stitches (pattern #09, mode 2)
Select pattern #09 (mode 2).
Press the memory button.
Pattern #09 is memorized.
Select pattern #44 (mode 2).
Press the memory button.
Pattern #44 (2 counts of straight stitch) is memorized.
Two counts of straight stitch are inserted between blind
stitches.
q Pattern #09 (blind stitch)
w Pattern #44 (2 counts of straight stitch)
NOTE:
Pattern #46 is an extender stitch for the triple stretch stitch
(#05).
Example: Inserting 4 counts of the straight stitch after
pattern 56 (mode 2)
Program pattern #56 and #45 (4 counts of straight stitch).
q Pattern #56
w Pattern #45 (4 counts of straight stitch)
126