In automatic reverse stitching, in case the forward and the reverse stitches do not match, a rough correction can be made by adjusting the feed adjustment

spring hook 1 .

※ To make a fine correction, the correction of timing of the reverse feed stitching solenoid is necessary by adjusting Function Setting Nos. 51, 52

and 53. Refer to the Instruction Manual for the control box (SC-920) for details of adjustment procedure.

1) In case the stitch does not match the target as shown in 3 , loosen feed adjustment spring hook fixing screw 2 , make 1 slide in A direction, and fix using

the screws 2 .

2) In case the stitch does not match the target as shown in 4 , loosen feed adjustment spring hook fixing screw 2 , make 1 slide in B direction, and fix using

the screws 2 .

29. CARE

WARNING :

Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine.

Perform the maintenance below every day for longer use of your machine.

(1) Confirmation of the amount of oil in the hook oil tank.

Confirm that the top of oil amount indicating rod 1 is between the upper engraved marker line and the lower engraved marker line of the oil amount indicating

window. (For the details, refer to "4. LUBRICATION".)

(2) Cleaning

1) Remove needle 2 , presser foot 3 and throat plate 4 .

2) Remove dust adhered to feed dog 5 and thread trimmer unit 6 with a soft brush or cloth.

3) Tilt the machine head and wipe out the dirt of bobbin case and the like with soft cloth, and confirm that there is no scratch. Wipe out with the cloth dust and

hook oil drained in the under cover near the hook.

Shorter

Sewing direction

Shorter

, -M

)

Direction of reverse

feed stitching

Shorter

– 14 –

Tabla de Contenido