Assembly; Preparing The Oven For Use - Breville BOV670 Serie Manual De Instrucciones

Assembly

PREPARING THE OVEN FOR USE

1. Remove and safely discard any packing
material, promotional labels and tape
from the oven.
2. Remove the crumb tray, wire rack, broil
rack, and baking pan from the polyfoam
packaging. Wash them in warm soapy water
with a soft sponge, rinse and dry thoroughly.
Insert the crumb tray into the oven.
3. Wipe the interior of the oven with a soft
damp sponge. Dry thoroughly.
4. Place the oven on a flat, dry surface. Ensure
there is a minimum distance of 4" (10cm) of
space on both sides of the appliance. Ensure
there are no items on top of the oven.
5. Unwind the power cord completely and
insert the power plug into a grounded
power outlet.
6. The oven alert will sound twice and the
LCD screen will illuminate.
NOTE
In order to remove any protective substances
on the heating elements, it is necessary to run
the oven empty for 15 minutes.
Ensure the area is well ventilated as the oven
may emit vapors. These are safe and not
detrimental to the performance of the oven.
7. Turn the FUNCTION dial until the
indicator reaches the PIZZA function.
The figure on the LCD screen indicates
the preset temperature of '400°F'. The
preset FROZEN FOOD setting will also
be displayed.
14
Press the center of the TEMP/TIME dial. The
LCD screen will indicate the preset time of
'15 MINS'.
8. Press the START/CANCEL button
to activate this setting. The oven alert
will sound, the button surround will
illuminate red and the LCD screen will
illuminate orange.
9. The LCD screen will indicate a blinking
'PREHEATING'. Once the oven has reached
the set temperature, the temperature
alert will sound.
10. The time will be displayed and
automatically begin to count down in one
minute increments.
11. At the end of the cooking cycle, the oven
alert will sound three times. The START/
CANCEL button surround will no longer
illuminate red and LCD screen will
illuminate blue.
12. The oven is now ready to use.
NOTE
The cooking cycle can be stopped at any time
by pressing the START/CANCEL button.
The START/CANCEL button surround will no
longer illuminate red and the LCD screen will
illuminate blue.
WHEN AT
TEMP.