Care And Cleaning - Breville BOV670 Serie Manual De Instrucciones

Care & Cleaning
Ensure the oven is turned OFF by pressing the
START/CANCEL button on the control panel.
The oven is OFF when the button surround
illumination is no longer red. Remove the
power plug from the power outlet. Allow the
oven and all accessories to cool completely
before disassembling and cleaning.
NOTE
Do not use abrasive cleansers, metal scouring
pads or metal utensils on any of the interior
or exterior surfaces of the oven, including
the crumb tray.
Do not use abrasive cleansers, metal scouring
pads or metal utensils to clean any of the
accessories as they may damage the
porcelain enamel finish of the baking pan
and broiling rack.
Cleaning the outer body and door
1. Wipe the outer body with a soft, damp
sponge. A non-abrasive liquid cleanser or
mild spray solution may be used to avoid
build-up of stains. Apply the cleanser
to the sponge, not the oven surface,
before cleaning.
2. To clean the glass door, use a glass cleaner
or mild detergent and a soft, damp sponge
or soft plastic scouring pad. Do not use an
abrasive cleanser or metal scouring pad as
these will scratch the oven surface.
3. Let all surfaces dry thoroughly prior to
inserting the power plug into a power outlet
and turning the oven ON.
IMPORTANT
Do not immerse the body, power cord or power
plug in water or any other liquid as this may
cause electrocution.
Cleaning the interior
The walls on the inside of the oven feature
a non-stick coating for easy cleaning.
To clean any spattering that may occur, wipe
the walls with a soft, damp sponge.
A non-abrasive liquid cleanser or mild spray
solution may be used to avoid build-up of
stains. Apply the cleanser to the sponge,
not the oven surface, before cleaning.
Avoid touching the quartz heating elements.
IMPORTANT
Use extreme caution when cleaning the
quartz heating elements. Allow the oven
to cool completely, then gently rub a soft,
damp sponge or cloth along the length of the
heating element.
Do not use any type of cleanser or cleaning
agents. Do not use any standard oven cleaner
to clean the interior of the oven as this will
deteriorate the metal surface.
Let all surfaces dry thoroughly prior to
inserting the power plug into a power outlet
and turning the oven ON.
Cleaning the crumb tray
1. After each use, slide out the crumb tray
and discard crumbs. Wipe the tray with
a soft, damp sponge. A non-abrasive liquid
cleanser may be used to avoid build-up of
stains. Apply the cleanser to the sponge, not
the tray, before cleaning. Dry thoroughly.
2. To remove baked-on grease, soak the tray
in warm soapy water then wash with a soft
sponge or soft plastic scouring pad.
Rinse and dry thoroughly.
3. Always ensure to re-insert the crumb tray
into the oven after cleaning and prior to
inserting the power plug into a power outlet
and turning the oven ON.
35