Loop Check Screen; How To View The Device Status; How To Disable Points; How To Disable Sounders - FireClass FC501 Guía Rápida De Instalación

2. Press 3 -View LOG.
3. Use the alphanumeric keypad to select the visuali-
zation of the filters:
Ø Option 1: Alarm events only;
Ø Option 2: Pre Alarm events only
Ø Option 3: Warning events only
Ø Option 4: Test events only
Ø Option 5: Fault events only
Ø Option 6: Restore events only
Ø Option 7: Generic events only.
The selection allows to observe only a certain type of
events, for example after a Walk Test, the events of te-
sting.
4. Press the RIGHT and LEFT cursor keys to scroll
the data blocks to view.
5. Press the UP and DOWN cursor keys to scroll the
events to view.
n Loop Check Screen
From MAIN page of the User Interface:
1. Press 2 -ANALYZE.
2. Select the option: 1, LOOP.
3. Press the UP and DOWN cursor keys to select the
Loop to view. The panel will check both sides of the
loop before displaying how points are configured.
4. Press the ESC key to step back to MAIN page.
n How to View the Device Status
From MAIN page of the User Interface:
1. Press 1 -ANALYZE.
2. Select the option: 2, DEVICE.
3. Press the RIGHT and LEFT cursor keys to scroll
the Loop to view then press ENTER key to select
the Loop.
4. Press ENTER key to view all the devices.
5. Press the RIGHT cursor key to select the next de-
vice and LEFT cursor key to select the previous
device.
6. Press the ESC key to step back to MAIN page.
n How to Disable Points
From MAIN page of the User Interface:
1. Press 2 -DISABLE.
2. The panel will prompt the User password, the defa-
ult User PIN is 11111: every digit will be hidden by
*(asterisk) symbol.
20
3. Press ENTER key.
4. Press options 2 - DEVICE.
5. Press the RIGHT and LEFT cursor keys to scroll
the
ENTER key.
6. Press the RIGHT cursor key to select the next avai-
lable device and LEFT key to select the previous
available device then press ENTER key to accept
the selected device.
7. Press ENTER key to accept the request to Disable
or ESC key to exit from the procedure.
n How to Disable Sounders
From MAIN page of the User Interface:
1. Press options 2 -DISABLE.
2. The panel will prompt the User password, the defa-
ult User PIN is 11111: every digit will be hidden by
*(asterisk) symbol.
3. Press ENTER key.
4. Press options 4 - OUTPUT.
5. Press the UP and DOWN cursors keys to scroll the
type of Output to Disable or enter the SC number
(sounder) and then press ENTER key.
6. If the sounder is disabled, the panel will prompt if to
enable it or vice versa, then press ENTER key to
confirm.
n How to load a language present in a USB stick
The languages in the USB stick, connected to the Pa-
nel, have been previously downloaded from the CD
supplied with the panel or from the FireClass site.
Procedure while the panel is running
1. Press 1 - PROGRAM
(enter the Installer password)
2 Press 7 -USB
3 Press 0- EXTRA (see scheme on Figure 7) .
In reference to the point 3) "EXTRA", at the first panel
power-up and/or at the end of the FW upgrade pro-
cess of the control panel, only a language can be loaded
overwriting the second languages previously present (the
first will be the English). The available language will be
contained in a file of a dedicated folder on a USB stick
connected to the control panel before first Power up.
This loaded language will be the language of the control
panel. If the USB stick is not present at the first panel
power-up, the system will propose the default langua-
ge: Italian and English.
Addressable Fire Panel
Loop of the device to disable then press
FC501