First Ignition Settings; Mains Power Frequency 50/ 60Hz; Date Time; Language - Dal Zotto BRUNELLA ELITE Manual Del Usuario

FIRST IGNITION SETTINGS

Once the power cord at the back of the stove has been connected, move the switch, also located on the back, to (I).
The switch at the back of the stove powers the stove board.
The stove remains o and a rst screen appears on the panel reading OFF .

MAINS POWER FREQUENCY 50/ 60HZ

If the stove is installed in a country with a frequency of 60Hz, the display will show "POWER FREQ. ERROR ".
Change the frequency as described below.
CONTROLS PROCEDURE
Š Press key 6,
Š Select the required frequency using keys 4 or 5.
Š Press key 6 to con rm and key 1 to scroll back through the menus until the initial page.

DATE TIME

This menu allows the date and time to be set.
CONTROLS PROCEDURE
Š Press key 6.
Š Press key 3 until SETTINGS appears and con rm by pressing key 6.
Š Con rm DATE TIME by pressing key 6 and using keys 4 and 5 to set the day.
Š Continue by pressing key 6.
Š Use keys 4 or 5 to set and key 6 to advance, to regulate the day, hour, minutes, date, month, year.
Š Press key 6 to con rm and key 1 to scroll back through the menus until the initial page.

LANGUAGE

This menu allows the preferred language to be selected.
The available languages are: Italian - English - German - French - Spanish - Portuguese - Danish - Estonian - Croatian - Slovenian.
CONTROLS PROCEDURE
Š Press key 6.
Š Press key 3 until SETTINGS appears and con rm by pressing key 6.
Š Press key 3 until LANGUAGE appears and con rm by pressing key 6.
Š Select the language using keys 4 or 5.
Š Press key 6 to con rm and key 1 to scroll back through the menus until the initial page.

DEGREES

This menu allows you to set the unit of measure for the temperature. The prede ned value is °C.
CONTROLS PROCEDURE
Š Press key 6.
Š Press key 3 until SETTINGS appears and con rm by pressing key 6.
Š Press key 3 until DEGREES appears and con rm by pressing key 6.
Š Use keys 4 -5 to select Celsius or Fahrenheit.
Š Press key 6 to con rm and key 1 to scroll back through the menus until the initial page.
NO IGNITION
THE APPLIANCE MAY FAIL TO LIGHT BECAUSE THE AUGER IS EMPTY AND NOT ALWAYS ABLE TO LOAD THE BURN
POT FAST ENOUGH WITH THE PELLETS NEEDED FOR NORMAL IGNITION. IF THE PROBLEM OCCURS AFTER ONLY A
FEW MONTHS OF OPERATION, CHECK THAT THE ROUTINE CLEANING DESCRIBED IN THE STOVE HANDBOOK HAS
BEEN CARRIED OUT CORRECTLY
56 ENGLISH