Additional Thermostat; Delta T; First Load; Wi Fi - Dal Zotto BRUNELLA ELITE Manual Del Usuario

ADDITIONAL THERMOSTAT

N.B. : INSTALLATION MUST BE PERFORMED BY AN AUTHORISED TECHNICIAN
It is possible to control the temperature of a room adjacent to the room where the stove is positioned (it is advisable to place the optional
mechanical thermostat at a height o the ground equal to 1.50 m). Stove operation with the external thermostat connected in the TA clamp
may di er depending on whether or not the STAND BY function is enabled.

DELTA T

This function allows you to set the hysteresis to switch the stove on and o DELTA T, used as a room temperature adjustment interval if not
managed by an external thermostat. The exact temperature for ignition is SET THERMOSTAT DELTA T.The temperature for switch-o is SET
THERMOSTAT + DELTA T.
The possible values for DELTA T go from: 0.5 - 5°C
CONTROLS PROCEDURE
Š Press 6.
Š press 3 until SETTINGS appears and con rm by pressing 6
Š Press 3 until DELTA T appears and con rm by pressing 6.
Š Use keys 4 -5 to set the desired value.
Š Press 6 to con rm or 1 to return to the previous menus to the initial state.

FIRST LOAD

This function allows the auger to be lled, thus facilitating rst stove ignition phases, or in the event the pellet hopper is empty. With the
stove cold and "OFF", make sure the pellets have been introduced inside the hopper and activate the FIRST LOAD function, con rming by
pressing OK.
To interrupt continuous loading, simply press key 1 for 3 seconds.
CONTROLS PROCEDURE
Š Press key 6.
Š press key 3 until SETTINGS appears and con rm by pressing key 6.
Š Keep pressing key 3 until FIRST LOAD appears and con rm by pressing key 6.
Š Use keys 4-5 for enabling "ON" or disabling "OFF".
Š Press key 1 several times to con rm and exit the menu.

WI FI

The display allows internet connection using Wi-Fi technology.
This allows remote management and control of the stove using the dedicated APP for Smartphones,
"TotalControl 2.0" (Apple Store / Play Store).
The Wi Fi network can be con gured directly from the display using the following procedure (Home network
con guration).
WI FI ENABLING CONTROLS PROCEDURE
Š Press key 6.
Š Press key 3 until SETTINGS appears and con rm by pressing key 6.
Š Keep pressing key 3 until Wi Fi appears and con rm by pressing key 6.
Š Press key 6 to access ENABLING.
Š Use keys 4-5 to select enabling "ON"/ disabling "OFF" and press key 6 to con rm.
Š Press key 1 several times to exit the menu.
CONTROLS PROCEDURE TO RESET WI FI CONFIGURATION AND ENABLE ACCESS POINT
Š Press key 6.
Š Press key 3 until SETTINGS appears and con rm by pressing key 6.
Š Press key 3 until Wi-Fi appears and con rm by pressing key 6.
Š Press key 3 until RESET appears and the press key 6.
Š Use keys 4-5 to select start reset "ON" / "OFF" and press key 6 to con rm.
Š Press key 1 several times to exit the menu.
ENGLISH
ATTENTION DOWNLOAD:
"TOTAL CONTROL 2.0" APP
63