Safety Regulations - Corghi Artiglio Master 26” MI Manual De Uso

The equipment is intended for professional use only.
WARNING
Only one operator may use the equipment at a time.
WARNING
Failure to comply with the instructions and the danger warnings can cause serious
injury to the operator and others in the area. Before powering up the machine,
read and ensure you understand all the danger, warning and attention notices in
this manual.
This machine can only be used properly by a qualified, authorised operator capable of
understanding the written instructions provided by the producer; he must also be trained
and be familiar with the safety regulations. Operators must not use the machine under
the influence of alcohol or drugs which may affect their physical and mental capacity.
The following conditions are essential:
- The operator must be able to read and understand all the information in this manual.
- He must have a thorough knowledge of the capabilities and characteristics of this ma-
chine.
- Keep unauthorised persons well clear of the area of operations.
- Make sure the machine has been installed in compliance with all relevant regulations
and legislation.
- Make sure that all machine operators are suitably trained, that they are capable of using
the equipment correctly and that they are adequately supervised.
- Never leave nuts, bolts, tools or other equipment on the machine; they may become
entrapped between moving parts.
- Do not touch power lines or the inside of electric motors or other electrical equipment
until the power supply has been disconnected.
- Read this manual carefully and learn how to use the machine correctly and safely.
- Always keep this operator's manual in an easily accessible place and consult it whenever
necessary.
WARNING
Do not remove or deface the Danger, Warning or Instruction decals. Replace
any missing or illegible decals. Missing or damaged decals can be obtained
at your nearest Corghi dealer.
- When using and carrying out maintenance on the machine, observe the standardised
industrial accident prevention regulations for high voltages.
- Unauthorised alterations to the machine relieve the constructor of all liability for any
consequent damage or accidents. Specifically, tampering with or removing the safety
devices is a breach of the regulations for safety in the workplace.
- The user must wear personal protection equipment such as gloves, safety footwear and
goggles.
46

SAFETY REGULATIONS

Artiglio Master operator's manual