Inglesina QUAD Manual De Instrucciones página 27

Ocultar thumbs Ver también para QUAD:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
To prevent injuries, keep your child away when unfolding
and folding this product.
Never use the rear handle to lift the stroller with the baby
inside.
LIST OF COMPONENTS
fig. 1
Frame
T1 Front wheel assembly
T2 Rear wheel assembly
T3 Feeding bottle holder
T4 Storage basket
Transport Seat
R1 Handrail
R2 Pushchair seat hood
R3 Muff
R4 Rain cover (if available)
Carrycot
C1 Carrycot hood
C2 Carrycot apron
Infant Car Seat (if available)
CHASSIS
ASSEMBLY/REMOVAL OF REAR WHEEL ASSEMBLY
fig. 2
Insert the wheel unit (T2) in line with the rear tube.
fig. 3
Push the wheel unit (T2) until it Clicks into place.
CAUTION: make sure that the wheels are properly
attached before use.
fig. 4
Remove the rear wheel unit (T2) press the small
button (T5) and remove it completely.
OPENING THE CHASSIS
fig. 5
Release the safety hook (T6) before opening the
INSTRUCTIONS
chassis.
fig. 6
opens completely (Click).
fig. 7
mechanisms are coupled properly before use.
CLOSING THE CHASSIS
fig. 8
press the button (T8) to lift the chassis until it closes.
fig. 9
procedure.
REAR WHEELS BRAKE
fig. 10
(T9) down.
Always engage the brake during stops.
CARRY HANDLE
fig. 11
chassis.
ADJUSTING THE HANDLE
fig. 12
Adjust the handle to the desired position by acting on the
side buttons (T10).
BLOCKING/UNBLOCKING THE FRONT WHEELS
fig. 13
can be blocked/unblocked by means of the lever (T11)
located in correspondence of the central joint.
FEEDING BOTTLE HOLDER
fig. 14
bottle holder (T3).
Secure the bottle holder by placing it in line with the hook
(T12) on the chassis and push it in place.
STORAGE BASKET
The chassis features a spacious storage basket (T4).
fig. 15
chassis (T15) in the dedicated housings on the basket (T16)
and fix the central Velcro fastening (T17).
fig. 16
hooks (T14) on the chassis.
fig. 17
basket underneath the rear brake assembly and fixing the
two small elastic loops (T18) to their respective hooks (T19)
underneath the chassis tube.
ADDITIONAL TRANSPORT UNITS (CARRYCOT, INFANT
CAR SEAT (if available), PUSHCHAIR SEAT)
fig. 18
the pushchair seat and the Cab 0+ car seat (if available).
ATTACHING THE CARRYCOT TO THE CHASSIS
fig. 19
the chassis in correspondence of the housings on both sides
of the structure and place it solely in rear facing position.
fig. 20
properly attached before use.
DETACHING THE CARRYCOT FROM THE CHASSIS
fig. 21
fig. 22
the handle.
Then grasp the handle and lift it until the chassis
CAUTION: make sure that both locking
Stand in front, grasp the opening handle (T7) and
Fasten the safety hook (T6) to complete the closing
Activate the brake by pushing the rear central lever
Use the opening handle (T7) to carry the closed
The chassis is equipped with an adjustable handle.
The chassis is equipped with swivel wheels, which
The chassis is equipped with a standard feeding
To fix it, insert the projecting rear elements on the
Engage the slots (T13) with the dedicated rear
Complete the connection by accompanying the
The chassis can be used with the Quad carrycot,
QUAD CARRYCOT
Take the carrycot from the handle and attach it to
CAUTION: make sure that the carrycot is
Use the lever (C3) on the outside of the carrycot.
Simultaneously, lift the carrycot by holding it by
27

Publicidad

Tabla de contenido
loading

Tabla de contenido