Menu In Detail - fischertechnik ROBO TX Controller Manual De Instrucciones

R O B O T X C

Menu in detail

žžžžžžžžžžžž
žžžžžžžžžžžž
žžžžžžžžžžžž
Back
È
ROBO TX
-> Local
-> No program file loaded
-> Master
-> Ext.
Start
* Master: The Controller, which is set as the master, receives control commands directly from the PC and passes these on
to the extensions. Extension: The Controller, which is set as the extension, receives control commands only through the
master.
26
I
O n T R O l l e R n s T R u C T I O n
Navigation using selection buttons
• If you press the
selection frame moves from the one line to the next. By
double clicking, the direction of movement of the selection
frame is changed. In the status window, the left selection
OK
push button switch has a start and stop function.
• If you press the
previous selection is confirmed. In this way, you move to
the next menu or activate or deactivate certain functions.
In the status window, you can always move to the main
menu using the right selection push button switch.
• If you select
menu.
First, you must set the desired country language. English is
the factory setting, which is the setting when you receive it.
Menu/Settings/Language/ select desired language and
confirm with OK
Note! The symbol „/" is used to separate texts, which can
appear as an alternative in the same line.
The Status Window
Line 1: Local / Online
ƒ
Local: No exchange of data with the PC (as master*) or no
connection to the master (as extension*)
Online: Master* exchanges data with the PC or extension* is
connected with the master*.
Menu
Line 2: No program file loaded/loaded:
ƒ
started: Program name
Shows, if a program file is loaded and if yes then the condi-
tion it is in.
Line 3: Master*/Extension* 1–8
ƒ
Shows, for which function the Controller was set, master* or
extension*. Changes are possible in the menu "Role".
M
a n u a l
left selection push button switch, a
right selection push button switch, the
"Back", you always return to the previous
Program name/