Troubleshooting; Technical Specifications - GGP ITALY BS 35 Manual De Instrucciones

14
EN

9. TROUBLESHOOTING

PROBLEM
1) The engine will
not start or will not
keep running
2) The engine starts
but is lacking in
power
3) The engine runs
irregularly and lacks
in power when
revved
4) The engine gives
off an excessive
amount of smoke

10. TECHNICAL SPECIFICATIONS

Engine ................................ 2-stroke air-cooled
Capacity / Power
35 mod. ............................. 32,6 cm
45 mod. ............................. 42,7 cm
Engine rotation speed at tick-over
35 mod. .......................................... 3000 rpm
45 mod. .......................................... 3000 rpm
Maximum engine rotation speed
35 mod. with 3-point blade ............. 9800 rpm
35 mod. with line cutter head ......... 8600 rpm
45 mod. with 3-point blade ............. 9300 rpm
45 mod. with line cutter head ......... 8600 rpm
Maximum tool rotation speed
35 mod. with 3-point blade ............. 7200 rpm
35 mod. with line cutter head ......... 6400 rpm
45 mod. with 3-point blade ............. 6900 rpm
45 mod. with line cutter head ......... 6400 rpm
LIKELY CAUSE
– Incorrect starting procedure
– Dirty spark plug or incorrect
distance between the electrodes
– Air filter clogged
– Carburetion problems
– Air filter clogged
– Carburetion problems
– Dirty spark plug or incorrect
distance between the electrodes
– Carburetion problems
– Incorrect composition
of the fuel mixture
– Carburetion problems
/ 0,9 kW
3
/ 1,1 kW
3
TROUBLESHOOTING / TECHNICAL SPECIFICATIONS
– Follow the instructions
– Check the spark plug
– Clean and/or replace the filter
– Contact your dealer
– Clean and/or replace the filter
– Contact your dealer
– Check the spark plug
– Contact your dealer
– Prepare the fuel mixture according
– Contact your dealer
Spark plug ........ L8RTF / NHSP LD or equivalent
Mixture ....... Petrol : 2-stroke oil = 40:1 = 2,5%
Tank capacity
35 mod. ............................................ 900 cm
45 mod. .......................................... 1000 cm
Maximum permitted blade diameter
3-point blade .................................. Ø 255 mm
Weight
1)
"MONO" models ................. from 6.9 to 7.1 kg
"DUPLEX" models .............. from 7.5 to 7.7 kg
Weight as per standard ISO 11806 (without
1)
fuel, cutting devices and guards)
SOLUTION
(see chapter 6)
(see chapter 8)
(see chapter 8)
(see chapter 8)
(see chapter 8)
to the instructions (see chap. 5)
3
3