Troubleshooting; Malfunction Causes And Remedies; Appendix; Information Regarding The Eu Declaration Of Conformity - Tronic TLG 500 B1 Instrucciones De Uso

Troubleshooting

In this section you will receive important information for the localisation and
remedying of malfunctions .

Malfunction causes and remedies

The following table will help with localising and remedying minor malfunctions:
Defect
The battery
charger is not
functioning .
The inserted
batteries are not
being charged .
NOTICE
► If you cannot solve the problem with the aforementioned methods, please
contact Customer Services .

Appendix

Information regarding the EU Declaration of Conformity

This appliance complies with the essential requirements and
other relevant provisions of the European Electromagnetic
Compatibility Directive 2014/30/EU, the Low Voltage Direc-
tive 2014/35/EU and the RoHS Directive 2011/65/EU .
The entire EU Declaration of Conformity is available from the
importer .
■ 24 │ GB │ IE
Possible cause
The power cable is not
plugged in .
Mains power socket is not
supplying power .
The batteries are not inserted
as per their polarity .
The inserted batteries are
not suitable for charging .
The temperature monitoring
was initiated .
Solution
Insert the power cable into a mains
power socket .
Check the circuit fuse .
Insert the batteries as per their polarity
(see marking in the loading slot
Insert exclusively rechargable Ni-Cd
and Ni-MH batteries of the types
AAA/AA/C/D and 9 V Block batteries .
Disconnect the plug from the mains
power socket and allow the device to
cool down .
) .
TLG 500 B1