Connecting Recording Components; Connecting To A Network - Sherwood R-807 Instrucciones De Funcionamiento

R-807 NETWORk AV RECEIVER

Connecting Recording Components

You can connect video and audio recording devices to
the VIDEO OUT and AUDIO OUT jacks. You can make
an audio or a video recording from the built-in tuner or
from an audio or video source connected to the main
unit.
Rear Panel
R
AUDIO
20
L IN
(COMPOSITE)
IN VIDEO

Connecting to a Network

If you have an internet connection, you can connect the
main unit to the internet as well as using a wireless or a
wired LAN connection.
The following illustration is a configuration example
of a home network with the system and a server. It is
recommended to connect the server to the router with a
wired connection.
Internet
To WAN side
Router
To LAN port
To LAN port
LAN port/Ethernet connector
Note
• After making a broadband internet connection,
you should set the communication settings. For
details, see "Network Setup" on page 49.
• When using a broadband internet connection,
a contract with an internet service provider is
required. For more information, contact local
internet service provider.
• Since the connected equipment and connection
method may differ depending on your internet
environment, refer to the operating instructions of
the equipment.
Modem
PC
Main Unit