Usb Device - Sherwood R-807 Instrucciones De Funcionamiento

Symptom
No picture.

USB DEVICE

Symptom
There is noise, skipping, or
distorted sound.
The USB device is not
recognized.
Playback does not start.
The USB device cannot be
connected into the (USB)
port.
• Depending on the output settings of the source component, the video format
may not be displayed. Change the output settings of the source, or connect your
source component directly to TV using the component or composite video jacks.
• This system is HDCP-compatible. Check that the components you are
connecting are also HDCP-compatible. If they are not, please connect your
source component directly to TV using the component or composite video jacks.
• Some source components will not work with the main unit (even if it is
HDCP-compatible). In this case, connect your source component directly to TV
using the component or composite video jacks.
If video images do not appear on your TV or flat screen TV, try adjusting the
•
resolution, DeepColor or other setting for your component.
• To output signals in DeepColor, use an HDMI cable (High Speed HDMITM
Cable) to connect the main unit to a component or TV with the DeepColor
feature.
Turn off the receiver and reconnect the USB device, then turn on the main unit.
•
• The music data itself contains noise, or the sound is distorted.
• Turn off the main unit, then disconnect the USB device. Turn on the main unit
again and reconnect the USB device.
• Connect the supported USB device (See page 31).
• The USB device does not work properly. Refer to the USB device operating
instructions on how to deal with this problem.
Turn off the main unit and reconnect the USB device, then turn on the main unit.
•
• Connect the supported USB device (See page 31).
• The USB device is being inserted upside down. Connect the USB device in the
correct orientation.
Troubleshooting
Remedy
Remedy
53