Setting The Wired Network Connection; Setting Other Network Options; Viewing The Network Information - Sherwood R-807 Instrucciones De Funcionamiento

R-807 NETWORk AV RECEIVER

Setting the Wired Network Connection

Before you setup the connection, check that the LAN
cable is connected to the LAN/ETHERNET connector
properly and securely. For details, see "Connecting to
LAN cable" on page 20.
Ethernet
You can enable and set the Ethernet connection
automatically on the main unit.
Ethernet Configuration
You can set the Ethernet connection settings manually.
menu item
Ethernet Device Inputs an Ethernet device name.
Sets the connection type as DHCP
Connection Type
or Static IP.
IP Address Inputs IP Address.
Inputs subnet mask when the
Netmask
DHCP function is disabled.
Inputs DNS address when the
DNS address
DHCP function is disabled.
Inputs Default Router when the
Default Router
DHCP function is disabled.
Note
• When you set DHCP as a connection type, you
do not need to set the IP Address, Netmask, or
DNS address etc.
• When you set Static IP as a connection type, you
should set the network connection manually by
entering the IP Address, etc. In this case, some
knowledge of networks is required. If you do not
understand internet connections, contact your
internet service provider.
50

Setting Other Network Options

AP Name
Resolution
Display size
Factory Setting
Description

Viewing the Network Information

Network Information
You can view the detailed information of a connected
network.
Passcode Information
You can view and change the passcode of the main
unit. When you use the main unit for the first time, you
should input this passcode when you enable Soft AP
hotspot and try to connect the mobile device to the main
unit.
menu item Description
Views and changes the name of
the unit displayed on the network.
Sets the resolution of the video
output.
Adjusts the screen display size
manually.
Resets all the settings to the
factory default.