Sherwood R-807 Instrucciones De Funcionamiento página 41

3
While a desired program type is displayed:
• The tuner automatically seeks a station
offering PTY services.
• If no station is found, "NO PTY" is displayed.
Displaying RDS information
1
Press DISPlAY.
• Each time this button is pressed, display mode
changes in the following order:
Function  Surround Mode  Volume  Radio
Text(RT)  Program Service Name(PS)  Program
Type (PTY)  Frequency
• Program Service Name(PS)
The name of the radio station.
• Program Type(PTY)
This indicates the kind of program currently being
broadcast.
• Radio Text(RT)
Messages sent by the radio station. For example, a
talk show radio station may provide a phone number
as RT.
• If signals are too weak or no RDS service is
available, "NO NAME", "NO PTY" or "NO TEXT" will
be displayed.
Operating Your System
Recording
You can make an audio or a video recording from
the built-in tuner, or from an audio or video source
connected to the receiver (such as a CD player or
TV). Keep in mind you can't make a digital recording
from an analog source or vice-versa, so make sure
the components you are recording to/from are hooked
up in the same way. (For details on connection, see
"Connecting Playback Components" on page 17.)
• The receiver's volume, Audio parameters (the tone
controls, for example), and surround effects have no
effect on the recorded signal.
• Some digital sources are copy-protected, and can
only be recorded in analog.
• Some video sources are copy-protected. These
cannot be recorded.
1
Select the desired recording source.
INPUT SElECTOR
2
Start recording on the component.
3
Start play on the desired input.
• The audio and video signals from the desired
input will be dubbed on the recorder and you
can enjoy them on the TV set and from the
speakers.
Note
• The volume and tone (bass and treble) settings
have no effect on the recording signals.
• When recording the analog signals from CD,
AUX, F.AUX etc., be sure to select the analog
input.
41