Controlling Room2; Connecting Power - Sherwood R-807 Instrucciones De Funcionamiento

Controlling Room2

Connect the external amplifier (with volume control)
placed in Room2 to the unit with analogue audio cable.
You can select different sources for main room and
second room (ROOM 2) and play them at the same
time.
1
Press ROOm2 on the remote control.
• The ROOM 2 indicator is displayed on the
fluorescent display.
2
Press the ROOM2 input select button to select
the desired mode.
• Each time the button on the universal remote
control is pressed, the input source changes
in the following order:
DVD  STB  AUX  F.AUX  TUNER
Note
• If you press the ROOM 2 INPUT SELECTOR
button when the ROOM 2 function is off, it is
automatically turned on.
3
Adjust the ROOM 2 volume by pressing the
ROOM 2 VOLUME UP(+)/DOWN(−) buttons.
4
Adjust the tone (bass and treble) for ROOM 2
source.
• The tone level can be adjusted within the
range of -10 ~ +10 dB.
• In general, we recommend the bass and
treble to be adjusted to 0 dB (flat level).
Caution
• Extreme settings at high volume may damage
your speakers.
5
Use the remote's left and right arrow buttons
to select OFF, SMALL or LARGE for the Front,
Center and Surround speaker positions,
depending on the speakers you have connected
to the receiver.

Connecting Power

Make sure to plug in only after you have connected all
your components to the main unit. Plug the supplied AC
input cord into the AC inlet and then into the wall outlet.
Rear Panel
AC power cord
making Connections
To the wall outlet
25