Arm Rest; Arm Rest - Removing/Inserting; Push Handle - Adjusting The Height; Adjustment Of Seat Depth - Days Solstice Comfort Manual De Instrucciones

GB – 10
8.5

Arm rest

8.5.1 Arm rest – Removing/inserting
Remove
1. Loosen clamping screw (A).
2. Pull side panel out of its receptacle.
Insert
1. Insert side panel into its receptacle.
2. Retighten clamping screw (A).
8.5.2 Push handle – Adjusting the height
1. Loosen both clamping screws (A).
2. Slide the push handle to the desired height.
3. Retighten the clamping screws.
8.6

Adjustment of seat depth

1 × Allen key (4 mm)
A
1. Loosen clamping screws (A).
2. Pull out the legrest supports to the desired depth.
A
A
Solstice Comfort – 15.09.2010
Caution!
Do not pull out legrest supports beyond the mark indicat-
ing the maximum pull-out depth.
3. Retighten the clamping screws.
Note
After pulling out the legrest support, ensure that the seat
cushion is moved forward, see page 8.
8.7

Legrests

8.7.1 Legrests – Adjusting the width
1 × Allen key (4 mm)
A
1. Loosen clamping screws (A).
2. Pull out both legrest receptacles evenly to the desired
width.
3. Retighten the clamping screws.
Caution!
Do not pull out legrest receptacle beyond the mark indi-
cating the maximum pull-out depth.
8.7.2 Legrests – Adjusting the length
1 × Allen key (4 mm)
1. Loosen clamping screw (A).
2. Adjust legrest to the desired length.
3. Retighten the clamping screw.
A