Bovie AARON 940 Guia Do Utilizador página 12

The Aaron 940 is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the
interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the
output power of the communications equipment.
Rated maximum output
power of transmitter
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in metres (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
The Aaron 940™ is intended for use in the electromagnetic environment listed below. The customer or the
user of the Aaron 940™ should assure that is used in such an environment.
Emissions test
RF Emissions CISPR 11
RF Emissions CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/flicker
emissions
IEC 61000-3-3
User's Guide • Aaron 940 ™
Recommended separation distances between portable and mobile RF
communications equipment and the Aaron 940™.
Aaron 940™
Separation distance according to frequency of transmitter in metres (m)
150 kHz to 80 MHz
d = 1.2 P
W
0.12
0.01
0.38
0.1
1.2
1
3.8
10
12
100
Guidance and manufacturer's declaration – electromagnetic emissions
Group 2
Class A
Class A
Complies
Aaron 940™
can help prevent electromagnetic
as recommended below, according to the maximum
80 MHz to 800 MHz
d = 1.2 P
0.12
0.38
1.2
3.8
12
Compliance Electromagnetic environment - guidance
Aaron 940™
The
electromagnetic energy in order
to perform its intended function.
Nearby electronic equipment may
be affected.
Aaron 940™
The
use in all establishments other
than domestic and those directly
connected to the public low-
voltage power supply network that
supplies buildings used in
domestic purposes.
800 MHz to 2.5 GHz
d = 2.3 P
0.23
0.73
2.3
7.3
23
must emit
is suitable for
11