Setup Procedures - Bovie AARON 940 Guia Do Utilizador

Figure 1

SETUP PROCEDURES

1. Mount the Aaron 940™ on the wall or optional mobile stand using the standard mounting kit (see figure 1).
Do not operate the unit in the horizontal position, as liquids may spill into unit.
2. Plug the female end of the power cord into the base of the unit (see figure 2, letter A).
3. Plug the male end of the power cord into a grounded wall receptacle.
4. Plug the handpiece into the monopolar output on the lower left of the front on the unit (see figure 2, letter B).
The plug is designed to fit in only one direction. Plug the smaller round connector from the handpiece into the
Figure 2
User's Guide • Aaron 940 ™ 7