Operation, Precautions - Chicago Pneumatic CP 0010 Instrucciones De Seguridad Y De Funcionamiento

CP 0010
► Always make sure that the outlet end of the
discharge hose is properly secured.
WARNING Fixed installation hazard
The pump is primarily intended for use in temporary
(mobile) applications. If the pump is used in a fixed
installation, the connections between pump and
pipe can come loose and jets of liquid or other
particles can hit the operator, and cause personal
injury or death.
► Always use a flexible hose in connections between
pump and pipe.
Never hang the pump by its hose.
►

Operation, precautions

DANGER Explosion hazard
If a pump comes into contact with explosives or
explosive gases, an explosion could occur. When
using certain materials in machine parts, sparks and
ignition can occur. Explosions will lead to severe
injuries or death.
► Never operate the machine in any explosive
environment.
WARNING Flammable liquid hazard
If flammable liquid is being pumped, the fumes can
explode when ignited. This can lead to personal
injury or death.
Never pump flammable liquids.
►
WARNING Hot pump
If the discharge outlet is closed when pumping, the
pump will become hot. If hot liquid is being
pumped, the pump can be become hot. Touching
a hot pump can lead to burns and personal injury.
Never use the pump if the discharge outlet is
►
closed.
► Avoid touching the pump if hot liquid is being
pumped.
DANGER Unprotected impeller
An unprotected impeller can cause serious personal
injury
Never run the machine without suction strainer
►
and base plate.
WARNING Emergency stop hazard
If an emergency situation occurs while pumping,
and the pump is not stopped immediately, personal
injury or death can occur.
► Install an on/off valve on the air supply hose, as
close to the pump as possible.
Activate the on/off valve if an emergency situation
►
occurs.
9800 0552 90c | Original instructions
www.CrowderSupply.com • Toll Free: 888-883-5144
Safety and operating instructions
WARNING Unexpected movements
When in use, the pump may unexpectedly move.
Accessories may break due to fatigue after a certain
amount of use. Sudden and unexpected movement
can cause injuries. Furthermore, losing your balance
or slipping may cause injury.
► Pay attention not to lose your balance when
submerging or taking the pump out of the liquid,
use a proper lifting device.
Always inspect the equipment prior to use. Never
►
use the equipment if you suspect that it is
damaged.
Make sure that the pump and its accessories are
►
clean and free of grease and oil.
► Moving parts may crush and cut, never check
bores or passages with hands or fingers.
Never strike or abuse the equipment.
►
► Check regularly for wear on the accessories, and
check whether there are any signs of damage or
visible cracks.
Pay attention and look at what you are doing.
►
WARNING Projectiles
During operating, particles or jets of liquid may
become projectiles and cause personal injury by
striking the operator or other persons. To reduce
these risk:
Use approved personal protective equipment and
►
safety helmet, including impact resistant eye
protection with side protection.
► Make sure that no unauthorised persons trespass
into the working zone.
Keep the workplace free from foreign objects.
►
Jets of liquid from the discharge hose could
►
contain solids travelling at a great speed. Do not
direct the liquid jets towards other personnel.
WARNING Slipping, tripping and
falling hazards
There is a risk of slipping or tripping or falling, for
example tripping on the hoses or on other objects.
Slipping or tripping or falling can cause injury. To
reduce this risk:
► Always make sure that no hose or other object is
in your way or in any other person's way.
Always make sure you are in a stable position with
►
your feet as far apart as your shoulders width and
keeping a balanced body weight.
7