Electrical Installation - Prowinch PWLD Serie Manual Del Usuario

4.3 ELECTRICAL INSTALLATION

Electric winches require power from a battery to be operational. Verify that your battery is in good condition and can provide a
minimum of 650 CCA. With proper wiring, power can be provided to the winch through a vehicle battery or through a separate,
auxiliary battery that powers the winch only. ALWAYS pay attention to GENERAL SAFETY PRECAUTIONS, described in this User's
Manual, before performing electrical installation. After properly mounting the winch and verifying every nut is adjusted at the
recommended torque, plan a route for the wiring from the point of the vehicle where the winch is mounted. Route the wiring from
the winch to the battery, being careful to avoid contacting hot or sharp surfaces that may damage the wiring, tangle it in moving
equipment, or cause a tripping hazard. According to your winch model, electrical installation may vary.
PWLD150012V/24V – PWLD3000Ai12V/24V – PWLD3500B – PWLD4000A - PWLD5000B – PWLD600012V
These models are easy to install, mainly used in ATV's, UTV's and SxS's, they are equipped with wired control switch, Mini
Switch (only PWLD4000A), solenoid, battery positive and negative leads and all wiring and hardware necessary to complete
your installation.
Avoid installing electrical cables around pinch and wear/abrasion points.
16
(please refer to Fig. 5)
ATTENTION