Prowinch PWLD Serie Manual Del Usuario página 25

Steps:
1) De-energize the Winch, disconnect the battery or use the circuit breaker (if available).
2) Open the control box
3) Connect the receiver red cable to the battery input
4) Connect the black cable to negative
5) Connect the white cable to the control terminal
6) Connect the yellow cable to the control terminal
7) Turn on the remote control by pushing both buttons at the same time.
8) Connect the battery or the circuit breaker
9) Test the operation
10) Mount the cover of the control box
Use
LED indicator
Unwind Wind
Wind Unwind
Start Sequence
1- Turn on the remote by pressing both buttons at the same time for 1 second
2- When the led light turns on the remote is ready for operation
3- Press the "Wind"or the "Unwind" button as deemed necessary
Turn off Sequence
1- Press both buttons until the Led light turns off
25