Alarms And Warnings; Energy Saving - Parker ATT Serie Manual De Uso

English
- - -Main Menu - - -
START/STOP
USER SETTINGS
SERVICE
INFORMATION
From this page you can view system information and alarm history.
Select SYSTEM INFOand press Enter to confi rm:
- - - Informations Menu - - -
SYSTEM INFO
ALARMS HISTORICAL
Using Up and Down. You can view:
- Information on cycles times;
- Values input signals:
INPUTS
Pressure 1 (B6) :
Pressure 1 (B7) :
Level (B8) :
AD Inlet Temp (B9):
Thermal Mass (B10):
- Counter
2014/Gen/24 16.20.20
HOURS COUNTERS
UNIT_ON : 000001
COMPRESSOR : 000001
LAST OFF DAY : 00,00.00
- Information about software
SOFTWARE INFO
SW Release :
SW date: 2014/01/20
Bios : 5.00. 20/May/01
Boot : 4.00. 20/May/01
- Information about bypass
BYPASS
BYPASS STATUS :
OPEN L.SWITCH:
CLOSE L.SWITCH :

5.4 Energy saving

5.4.1 ENERGY SAVING ( kWh)
The user can see how the unit is saving in kWh, compared with a similar
machine to be chosen from:
- Heatless
- Heat Regenerated
- Blower
press the key DOWN one time
This Screen appears:
5.4.2 ENERGY SAVING (money)
The user can see how the unit is saving in "money".
Press the key DOWN two time
This Screen appears:
'
04.2
Steps to enable these functions:
04.3
1. Press PRG than USER than SETTINGS than OTHER.
NO WAT:
02.6
This Screen appears:
02.4
(h)
(h)
2. Parameter U12- Enable Money: to enable the energy saving with
money change in YES and press enter to confi rm.
S1
10
OFF
Closed
Open
ATT140-340
on the main menu.
ENERGY SAVING
0000073.1
KWh
on the main menu.
ENERGY SAVING
000000009€
U12 - BACKLIGHT ON: NO
U13 - Enable Money : NO
U14 - Money : Euro
U15 - Money / KWh : 0.120
U16 - Saving Compared
to Heatless
U2
3. Parameter U13- Money: choose the money symbol:
Symbols available:
Parameter Description
Euro euro
USA Dollar U.S. dollar
ENG Pound English pound
JAP Yen Japanese yen
SCAN Krone Krone
RUS Rublo rublo
4. Parameter U14- Money/KWh: conversion factor for the calculation
of the currency. On default "0.12" between euro and KWh.
5. Parameter U15- Saving Compared to: permit the selection of the
machine is comparable, chose between Heatless, Heat Regenerated,
Blower.
NOTE: The symbol appears only when the units is in ON.

5.5 Alarms and warnings

• Alarms have the effect of turning off the refrigeration circuit (the
dryer is never completely blocked).
• The warnings only give an signal.
• In case of alarms or warnings contact the supplier.
• The alarm list is on see par. 7.
5.5.1 ALARM AND WARNINGS
In case of alarms:
1. The key became red.
2. on display press the key . Appears the alarm code "fl ashing".
Press the key " " to reset the alarm (only after the disappearance of
the alarm condition).
6 / 14
Simbol