Spanset NoCut Instrucciones De Uso página 11

Dear SpanSet customer, congratulations on purchasing NoCut! With this
purchase, you have chosen a quality product that guarantees many years of
service if used correctly. This Operation Manual provides information about how to use
the product correctly and safely. Please contact your SpanSet retailer or SpanSet
technical support staff should you have any further questions. Besides a large range of
lifting accessories, www.spanset.de also features the entire range of hoisting
technology as well as other load-securing products and personal protective equipment.
Your SpanSet group of companies.
Do not use NoCut until you have read and understood this Operation Manual in
full! In addition, adhere to and follow the Operation Manual for the lifting
equipment that you use together with NoCut, as well as the general regulations
concerning the hoisting of loads. This Operation Manual is to be passed on with the
product.
Danger! Non-adherence to these key instructions may lead to loss of the
protective function! Severe accidents resulting in injuries, or even death,
are possible.
Please note the symbols provided on the pull-out, which are explained by the following
numbering:
Do not use any NoCut products that are damaged or worn!
1
Never place NoCut on burred or uneven edges!
2
Never apply NoCut in a twisted manner!
3
4 The length and width of NoCut must correspond to the area of the
lifting accessory to be protected!
5 Do not place load on NoCut; do not crush NoCut!
6 It is expressly forbidden to slide the load into NoCut!
7 Load-bearing sections must not twist, cross over or overlap in NoCut!
No load overhanging allowed!
8
See also "Useful information and training"
1
1
Seite
EN
9