NSK Ti-Max Z45L Manual Del Operador página 11

3) Insert the Spray Nozzle in rear of the handpiece. Hold the handpiece and spray for approximately 2-3 seconds. Apply lubricant until it expels from
the handpiece head for at least 2 seconds. ( Fig.5 )
CAUTION
· When applying spray be sure to hold the handpiece firmly to prevent the handpiece from slipping out of the hand due to the spray pressure.
· Hold the spray can upright.
Chuck cleaning
Clean Push Button chuck once a week.
1) Mount the arrow-head spray nozzle tip into the spray can port.
2) Lubricate the chuck directly through the bur insertion hole. (Fig.6)
3) Lubricate handpiece by using NSK PANA SPRAY Plus (Fig.5) or Care3 Plus.
10
Arrow-head Spray Nozzle
Bur Insertion
Hole
Fig. 6