NSK Ti-Max Z45L Manual Del Operador página 5

3-2 Disconnection
Hold the motor and the handpiece separately and disconnect with care.
CAUTION
· Disconnect the handpiece only after the motor has completely stopped rotating.
· Connect ONLY to E type motors ( ISO 3964 ) .
4. Insertion & Removal of the Bur
4-1 To Insert the Bur
1 ) Insert the bur until it is correctly seated in place. ( Fig.2 )
2 ) Depress the Push Button and insert the bur into the chuck until it is secure then release the button.
3 ) Ensure that the bur is secure by gently pulling and pushing the bur WITHOUT depressing the Push
Button.
4
Push Button
Fig. 2