Run Data Logging; Configuration; Acquisition - Promax OD-405 Manual De Instrucciones

USER'S MANUAL. OD-405/410B/411/415
7. Press Duration and use the Variable knob to set the duration time.
Duration 5 mins ~ 100 hours
8. Press Previous menu to return to the Data logging menu. Data
logging is now ready to begin.

5.5.4 Run Data logging

Ensure the data source and data logging setup has been set.
1. Insert a USB flash drive into the USB front panel port.
2. Press the Utility key.
3. Press the More key.
4. Press the Data logging Menu key.
5. Press Data logging to turn data logging On. Data/image files start
logging to the USB flash drive automatically. To stop the Data
logging, press the Data logging key again.
5.6

Configuration

5.6.1 Acquisition

The acquisition process samples the analog input signals and converts
them into digital format. The normal, average or peak detect may be selected
as acquisition mode.
Procedure:
1. Press Acquire key. Select acquisition mode between Normal,
Average and Peak detect (F1~F3). The icon which is placed on the
upper right corner will change depend on the selected mode.
2. The way to select the average number of samples, press F3
repeatedly.
Acquisition Modes:
Normal
Page 55
All the acquired information is used to draw
the waveform.
11-2011