Promax OD-405 Manual De Instrucciones página 193

USER'S MANUAL. OD-405/410B/411/415
Detail
Fast
Waveform type CH1, 2
Math
Storage location Internal
Memory
External
USB Flash
drive
Ref A, B
Waveform
Memory Depth The OD-411/OD-415 can save waveform with a memory
length of 4k, 1M or 2M points. The OD-405/OD-410B can
only save waveforms with a memory length of 4k points.
For the OD-411/OD-415, the memory depth is limited to
1 M points when both channels are activated or 2M points
when only a single channel is activated. The signal must
be triggered / stopped to have access to the full memory
depth. Therefore when a signal is saved the waveform will
be automatically stopped if it is not manually triggered
/stopped first.
Page 77
The OD-405/OD410B can only recall the
"Fast" format with a memory length of 4k.
Contains the waveform amplitude and
time of each point (4k/1M/2M) relative to
the trigger point.
Only contains the waveform amplitude
data for each point (4k/1M/2M).
Input channel signal
Math operation result.
The oscilloscope's internal memory, which
can hold 15 waveforms.
A USB flash drive (FAT or FAT32 format)
can hold practically an unlimited number
of waveforms.
Two reference waveforms are used as a
buffer to recall a waveform in the display.
You have to save a waveform into internal
memory or to USB, then copy the
waveform into the reference waveform slot
(A or B), and then recall the reference
waveform into the display.
11-2011